HVAC systems operate on a loop. They “inhale” through return vents in your home, drawing air through the ductwork and across the heating or cooling source (either the burners on a furnace or the coil on an AC or heat pump). To send warm or cool air to your living environment, they “exhale” through supply ducts and vents. The air circulating your home picks up hair, dust, and other debris.
An HVAC filter must capture that debris, and by doing that, it primarily shields your heating and cooling systems and can enhance the quality of your home’s air. Many modern filters assert that they may remove debris from your system while removing allergies, bacteria, and other particles.
Consequently, your home’s air quality depends heavily on the quality of the air filter in your HVAC system. Since indoor air pollution can be up to five times higher than outside air pollution (and nobody loves breathing pollutants), a high-quality air filter is essential for maintaining sanitized air in your house. With so many types of air filters in the market, here are some evaluations to help you decide on the ideal one.
Pleated vs. fiberglass vs. washable electrostatic filter
You can get a pleated filter, a fiberglass filter, or a washable, reusable filter. Let’s examine these in more detail:
Pleated
The material inside the frame that does the actual filtering, or “filter media,” is what is known as a pleated filter. The media of a pleated filter is folded like an accordion to increase surface area. Today’s synthetic polymers, once used to make cotton-based pleated filters, enable effective filtration while having a minimal impact on airflow. Pleated filters are easy to use and very effective. All you ever need to do is remember to replace them, and they’ll keep removing debris from your air.
Fiberglass
These are the least expensive air filters on the market and can occasionally be found for less than a dollar. Due to their weakness, they are the least effective alternative and are referred to as “prefiltering” devices by the National Air Filtration Association, which explains why they are so inexpensive. Simply put, they do a poor job at it.
Washable electrostatic
Metal-frame filters, called washable electrostatic filters, are meant to be washed and reused instead of replaced. These have a wide price range, with the most expensive costing around $90. The benefit of these filters is their long lifespan. Although they eventually lose effectiveness, you can use them repeatedly for many years. However, you must wash them often and let them air dry thoroughly before reinstalling them.
Quality
Three different rating scales are available for measuring the quality of air filters. The MERV scale is the most popular, with values ranging from 1 to 16. Filters with 8, 11, and 13 MERV ratings are ideal for home air conditioning systems, and anything with a rating of less than 8 is unsuitable.
On the other hand, anything above 13 may only be necessary in the most delicate circumstances. For instance, if a family member has respiratory conditions like allergies and asthma. Before choosing, consider other filter scales, including the FBR vs. MERV comparison.
Size
The filter size that fits in your air return is all you need. Usually, that size is printed on the side of the air filter you are currently using, and this size will be rounded from its actual size to the nominal size.
You must measure your vent with a tape measure if you don’t have a reference point from a previous filter. These measures will be the correct size; however, you must increase the length and breadth by 14″ to obtain the nominal size.
Thickness
You should also consider thickness when choosing an air filter for your home. For instance, a regular 1-inch fiberglass filter needs to be changed once every month. A 4-inch pleated filter, however, has a substantially bigger surface area, allowing it to catch airborne particles and endure for several months
more efficiently.
Remember that an overly dense filter for your setup can make it more difficult to properly and efficiently heat and cool your home. Over time, it may also harm your furnace, air conditioner, or heat pump when components overheat or freeze solid. On the other hand, an unnecessary loose filter is also not ideal. It’s a lost chance to breathe cleaner air, and it could eventually cause damage to your HVAC system as debris builds up on the blower and coils.
Finding the sweet spot—a filter that permits sufficient airflow through your ducts while trapping as much dirt as possible—is critical to proper filtration. For instance, many 4-inch, replaceable home pleated filters with MERV ratings of 11 or more can last 6 to 12 months under typical household conditions.
Climate
The weather where you reside also impacts how you pick the ideal house HVAC filter. For instance, you may live in a humid region where mold growth is a significant worry. Use an HVAC filter with a MERV value of at least six or higher if possible.
By doing this, you minimize or eliminate the possibility of mold spores amassing in the filter, which, in turn, stops them from entering your home through the air. Changing the HVAC filter every two to three weeks in areas where the environment frequently becomes extremely humid is essential.
The endnote
At first, choosing the proper HVAC filter for your home can seem complicated. However, it is simpler to carry out once you know the aspects that go into your choice and are familiar with the many HVAC filter types and rating systems. You can find your ideal air filter by considering the type, quality, material, size, thickness, climate, and air quality needs. Once you have determined the perfect HVAC filter for your house, the next important thing to do is install it. After that, you must frequently check your filter and replace or clean it as necessary. You can engage an HVAC specialist to help you with the process.